Corrugated hose installation

1. The bellows of the stainless steel hose are made of chromium-nickel austenitic stainless steel. When used, attention should be paid to preventing the point corrosion of nitrogen ions and dilute sulfuric acid and corrosive damage of dilute sulfuric acid.
2. After the user conducts hydraulic test on the equipment and piping system equipped with stainless steel hose, it should prevent the impact of rust block and the deposition of chloride ion sediment, resulting in corrosion and mechanical damage.
3. During installation, the metal hose should be prevented from spatter scald and mechanical damage during welding, otherwise it will cause leakage.
4. The sealed piping system shall strictly abide by the safe operation procedures to prevent the hose from pulling off or blasting due to overpressure caused by improper operation or other factors.
5, please carefully digest the stainless steel hose installation method examples, and strictly in accordance with the correct sketch installation and use.